VOID All-Over Print Hoodie
VOID All-Over Print Hoodie
Cosmic voids (also known as dark space) are vast spaces between filaments (the largest-scale structures in the universe), which contain very few or no galaxies.
• 95% recycled polyester, 5% spandex
• Fabric weight (may vary by 5%): 9.08 oz./yd.² (308 g/m²)
• Soft cotton-feel fabric face
• Brushed fleece fabric inside
• Double-lined hood with design on both sides
• Unisex style
• Comes with drawstrings
• Overlock seams
• Blank product components in Mexico sourced from Poland and Mexico
• Blank product components in the EU sourced from China and Poland
Disclaimer: In areas where the fabric is double-layered (like pockets), details from the inner fabric layer may subtly show through, especially with lighter designs.
Size guide
CHEST (inches) | LENGTH (inches) | SLEEVE (inches) | |
2XS | 18 ⅞ | 26 ⅛ | 22 ¼ |
XS | 19 ¾ | 26 ¼ | 22 ¼ |
S | 20 ½ | 26 ¾ | 22 ⅝ |
M | 21 ¼ | 27 ⅜ | 23 |
L | 22 ⅞ | 28 | 23 ⅝ |
XL | 24 ⅜ | 28 ½ | 24 ¼ |
2XL | 26 | 29 ⅛ | 24 ¾ |
3XL | 27 ½ | 29 ¾ | 25 ⅜ |
4XL | 29 ⅛ | 30 ⅞ | 25 ¾ |
5XL | 30 ¾ | 32 ⅛ | 26 ⅛ |
6XL | 32 ¼ | 33 ¼ | 26 ⅝ |
CHEST (cm) | LENGTH (cm) | SLEEVE (cm) | |
2XS | 48 | 66.5 | 56.5 |
XS | 50 | 66.5 | 56.5 |
S | 52 | 68 | 57.5 |
M | 54 | 69.5 | 58.5 |
L | 58 | 71 | 60 |
XL | 62 | 72.5 | 61.5 |
2XL | 66 | 74 | 63 |
3XL | 70 | 75.5 | 64.5 |
4XL | 74 | 78.5 | 66.5 |
5XL | 78 | 81.5 | 66.5 |
6XL | 82 | 84.5 | 67.5 |
When Will My Order Arrive?
When Will My Order Arrive?
Usually, it takes 3–7 days to fulfill an order, after which it’s shipped out. The shipping time depends on your location, but can be estimated as follows:
● USA: 3–4 business days
● Europe: 6–8 business days
● Australia: 2–14 business days
● Japan: 4–8 business days
● International: 10–20 business days
Wash & Care Instructions
Wash & Care Instructions
Printed apparel (direct-to-garment)
We use the latest direct-to-garment (DTG) printing technology to offer a wide variety of printable garments and design color options. We use high-quality inks that won't fade for a long time if taken care of properly.
Keep in mind that the original manufacturer's care instructions don't take into consideration the DTG printing process. So we suggest following the care instructions on this page to learn how to take care of your printed garments properly.
Printed apparel can be machine-washed cold, inside-out on a gentle cycle with a mild detergent and like colors. Use non-chlorine bleach only when necessary. You shouldn't use any fabric softeners or dry-clean the items.
DTG-printed apparel can be tumble-dried on a low cycle, but hang-dry works best. When it comes to ironing, use cool iron inside-out. Don't iron the print.
Follow these instructions carefully to avoid fading and cracking of the print, and shrinking the garment that can occur if you wash or dry it on a high setting.
All-over printed apparel
All-over printed apparel and fabrics can be machine-washed cold with like colors, without bleach. Don’t dry-clean or tumble-dry the apparel. You can iron it with a low heat setting.
Embroidered hats and beanies
Embroidered hats and beanies can be wiped clean with a damp cloth in the spots where it’s needed. If necessary, hats can be hand-washed cold. Don’t use brushes.
Products can’t be machine-washed, bleached, tumble-dried, ironed, or dry-cleaned. Read the manufacturer label carefully for any other instructions.
Face Masks
Face Masks can be machine-washed at 140ºF (60ºC) with like colors, without bleach. They can't be dry-cleaned. You can tumble-dry the face masks on low heat and iron on a cool setting.
Phone Cases
To clean a phone case, remove the case from your phone. Add a little mild soap to water, and dampen a cloth or sponge with it. With the damp cloth, rub your case gently in circles. Let your case air-dry at room temperature.
Don’t clean your phone case with any alcohol-based products as they can remove the ink and discolor the case.
Ask Us A Question
Ask Us A Question
Share
Each Design Is Original
Each design is made with love by @yhama009.